Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX

• TP port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X
• 1000BASE-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802)
• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 20km (GT-802S)
• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 40km (GT-802S40)
• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 60km (GT-802S60)
• 1000BASE-SX/LX: 50/125μm/62.5/125μm multi-mode fiber cable or 9/125μm single-mode cable provides a distance depending on SFP module (GT-805A)

Warranty : 2 years

Warehouse : BKK

Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX

• TP port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X
• 1000BASE-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802)
• 1000BASE-LX: 9/125μm single-mode cable provides a distance of 20km (GT-802S)

Warranty : 2 years

Warehouse : BKK

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
• Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
• One fiber-optic, 1310nm wavelength, connector type and distance vary with model
– FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm
– FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm
• Data Transfer Rate:
– TP: 10/100Mbps
– FX: 100Mbps
• Duplex mode support:
– Full or half-duplex mode by auto-negotiation (TP)
– Full or half-duplex mode by DIP switch (FX)
• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
• DIP switch: 2 DIP switches
– Rear DIP switch: FX duplex mode selection
– Side DIP switch: LFP (Link Fault Pass-through) mode selection
• IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets

Warranty : 3 years

Warehouse : BKK

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
• Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
• One fiber-optic, 1310nm wavelength, connector type and distance vary with model
– FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm
– FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm
• Data Transfer Rate:
– TP: 10/100Mbps
– FX: 100Mbps
• Duplex mode support:
– Full or half-duplex mode by auto-negotiation (TP)
– Full or half-duplex mode by DIP switch (FX)
• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
• DIP switch: 2 DIP switches
– Rear DIP switch: FX duplex mode selection
– Side DIP switch: LFP (Link Fault Pass-through) mode selection
• IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets

Warranty : 3 years

Warehouse : BKK

• Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
• Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568
• One fiber-optic, 1310nm wavelength, connector type and distance vary with model
– FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm
– FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm
• Data Transfer Rate:
– TP: 10/100Mbps
– FX: 100Mbps
• Duplex mode support:
– Full or half-duplex mode by auto-negotiation (TP)
– Full or half-duplex mode by DIP switch (FX)

Warranty : 3 years

Warehouse : BKK

• High quality 19″ Rack-mountable Chassis installation
• Supports up to 15 modular media converters
• Two fans brings air-flow to cool system, and LED indicators for system and fan status
• Bay power isolation to ensure each bay is electrically isolated from each other
• Supports multiple converters – 10/100/1000Mbps, copper, fiber, single/multi-mode ST/SC/MTRJ connectors
• Reduces the effort of converter maintenance and management, diagnose the status at one time
• Cost-effective, easy to install

Warranty : 3 years

Warehouse : BKK